R-32 Refrigerant 9 kg – Eco-Friendly and Efficient Solution for Air Conditioning and Refrigeration Systems

R32 refrigerant 9 kg is a single-component HFC refrigerant used in air-conditioning and heat-pump equipment specifically designed for R32. This 9 kg format is suitable for professional installation, servicing, maintenance and refrigerant charging where R32 is specified by the equipment manufacturer.

R32 is the industrial designation for difluoromethane. Unlike blended refrigerants such as R410A, R32 is a single-component refrigerant. Correct equipment compatibility and charging procedures must always be confirmed before use.

R32 9 kg — Technical Specifications

The GWP100 value of 675 for HFC-32 is listed in Annex I of Regulation (EU) 2024/573. Product-specific information such as purity, filling tolerance, cylinder type, valve specification, manufacturer and country of origin should be taken from the actual TDS, SDS and product label.

What Is R32 Refrigerant?

R32, also known as HFC-32 or difluoromethane, is a single-component hydrofluorocarbon refrigerant. It is used in refrigeration and air-conditioning equipment designed specifically for its operating characteristics.

R32 has an ODP of 0 and a GWP100 of 675 according to the values listed in the current EU F-gas regulation. The applicable regulatory requirements depend on the type of equipment, refrigerant charge, application and market.

Key Characteristics of R32

• Single-component HFC refrigerant.
• Industrial designation HFC-32.
• Chemical name: difluoromethane.
• Chemical formula: CH₂F₂.
• ODP: 0.
• GWP100: 675.
• Supplied in a 9 kg format.
• Intended for equipment specifically designed for R32.

Applications of R32 Refrigerant

R32 is commonly used in equipment designed around this refrigerant, particularly in air-conditioning and heat-pump applications.

• Residential air-conditioning systems designed for R32
• Commercial air-conditioning equipment designed for R32
• Heat-pump systems designed for R32
• Professional HVAC servicing and maintenance
• Refrigerant charging during installation or approved service operations

The actual application must always be confirmed against the technical documentation of the equipment.

R32 Refrigerant 9 kg for Professional HVAC Use

The 9 kg R32 refrigerant format is suitable for professional HVAC contractors, refrigeration technicians, maintenance companies and other customers who require R32 for equipment designed for this refrigerant.

The 9 kg quantity can be used for planned servicing, charging and maintenance operations, subject to the requirements of the specific equipment and applicable service procedures.

R32 Charging and Handling

R32 is stored as a liquefied gas under pressure and requires appropriate handling procedures. Because R32 is flammable, service work must take into account the refrigerant classification, equipment design and applicable safety requirements.

• Confirm that the equipment is designed for R32.
• Check the manufacturer's charging and service instructions.
• Use service equipment suitable for R32.
• Keep ignition sources away from refrigerant handling and service areas where required.
• Provide appropriate ventilation according to the equipment and applicable requirements.
• Use suitable personal protective equipment.
• Follow the current SDS for storage, handling and emergency procedures.
• Recover refrigerant in accordance with applicable requirements instead of intentionally releasing it.

R32 and Other Refrigerants

R32 is different from refrigerants such as R134a, R407C, R410A and R1234yf. Differences in pressure, thermodynamic properties, flammability classification, oil compatibility and system design mean that these refrigerants should not be treated as automatically interchangeable.

In particular, R32 should not simply be charged into an R410A system unless the equipment manufacturer explicitly specifies that configuration or an appropriate conversion has been technically approved.

R32 and R410A

R32 is one of the components used in the R410A refrigerant blend, but this does not mean that R32 and R410A can be used interchangeably.

R32 is a single-component refrigerant, while R410A is a refrigerant blend. Equipment designed for one refrigerant should therefore be serviced using the refrigerant specified by the manufacturer.

Environmental and Regulatory Information

R32 is an HFC refrigerant and is covered by the European Union framework regulating fluorinated greenhouse gases. Regulation (EU) 2024/573 establishes requirements concerning the containment, use, recovery, placing on the market and other aspects of fluorinated greenhouse gases.

The EU regulation lists HFC-32 with a GWP100 of 675. It also establishes equipment-specific restrictions and dates for certain categories of refrigeration, air-conditioning and heat-pump equipment. Therefore, compliance should always be assessed for the actual equipment and application rather than assumed from the refrigerant name alone.

For this reason, R32 should not simply be marketed as an "environmentally friendly" refrigerant. A more accurate description is that R32 has a GWP100 of 675 and zero ozone depletion potential.

Equipment Compatibility

Before purchasing R32, verify that the equipment documentation specifically identifies R32 as the required refrigerant.

• Check the equipment nameplate.
• Check the manufacturer's installation manual.
• Verify the specified refrigerant and required charge.
• Check the equipment's safety and ventilation requirements.
• Confirm that the service tools and recovery equipment are suitable for R32.

Before Buying R32 Refrigerant 9 kg

• Confirm that your equipment is designed for R32.
• Confirm the required refrigerant quantity.
• Check the product specification and available documentation.
• Verify manufacturer and batch information where required.
• Confirm the storage and transport requirements.
• Check applicable F-gas and national requirements.
• Ensure that installation and servicing are performed by appropriately trained personnel.

Product Documentation

Professional customers should have access to the relevant documentation accompanying the refrigerant. Depending on the actual product, this may include:

• Safety Data Sheet (SDS)
• Technical Data Sheet (TDS)
• Product label and batch information
• Packaging or cylinder information
• Additional product documentation where applicable

Only documentation corresponding to the actual R32 product supplied should be published on the product page. Manufacturer, purity, cylinder type, valve specification, origin and certification claims should not be added unless they are supported by the relevant documents.

Wholesale R32 Refrigerant 9 kg

We supply R32 refrigerant 9 kg for professional HVAC, air-conditioning and heat-pump applications where R32 is specified.

For wholesale or professional enquiries, contact us with the required quantity, delivery destination and intended application. We can provide information about availability, documentation and delivery options.

Frequently Asked Questions About R32